Download datasheet in PDF 
Download catalogue The hose is strong, and suitable for heavy-duty. The exterior is longitudinally corrugated.
High quality ribbed water hose that is characterized by the strong cross-braided insertions and a production process in which the inner and outer walls are connected with each other with heat, which offers a much stronger adhesion than many glued alternatives. Hose can be used as a water supply hose at construction sites in industry, shipyards and other locations where higher quality requirements are set for a water hose. Due to its special construction, hose is extremely suitable for reel applications.
corrugated hose - water hose - red hose - strong hose - heavy duty hose - longitudinally corrugated exterior
Operating pressure: 10 bar
Bursting pressure: 30 bar
Heat resistance: -20 °C / +60°C
Interior: black, smooth
Exterior: red, corrugated
Linings: polyesther fabric linings
Storage lots, splitting of the rolls are possible. Meantime, we hold the right of selling the stock in products.
| Inside Ø (mm) |
Wall thickness (mm) |
Külső Ø (mm) Outside Ø (mm) |
Weight (kg/m) |
Roll size (m) |
Article number |
Quote request for the entire size scale |
|---|---|---|---|---|---|---|
| 13 | 3 | 19 | 0,205 | 100 | 3000 013000 | Request a quote |
| 13 | 3 | 19 | 0,205 | 40 | 3000 013000-40 | Request a quote |
| 19 | 3,5 | 26 | 0,33 | 40 | 3000 019000-40 | Request a quote |
| 19 | 3,5 | 26 | 0,33 | 100/50 | 3000 019000-100 | Request a quote |
| 25 | 4 | 33 | 0,495 | 40 | 3000 025000-40 | Request a quote |
| 25 | 4 | 33 | 0,495 | 100/50 | 3000 025000-100 | Request a quote |
| 32 | 6 | 44 | 1,01 | 40 | 3000 032000-40 | Request a quote |
Relating products
Technical specifications:
The reinforced heavy duty hose clamp consits of a wide strong steel band and bolt.
The wide, strong hose clamp is made of stainless steel. The screwing out the bolt makes the interior strap rotating, so the clamp can be put on the hose without taking it down from the hose tail, but also it can be put on from the side without the parts of the clamp falling off.
The clamp was made according to the EU 20032/95/EC regulations.
Material:
The band is stainless steel (AISI 430), the Allen bolt is galvanized steel. The one-piece steel band edges are rounded.
Available from stock with W5 - AISI 316 material grade too!
The clamp can be entirely unfolded.
MIKALOR SUPRA - hose clamp - heavy duty hose clamp - stainless steel hose clamp - reinforced hose clamp
Forward to the item's page| Range of dimensions (mm) |
Band length (mm) |
Bolt thread / Bolt head width |
Clamping force (Nm) |
Article number |
Quote request for the entire size scale |
|---|---|---|---|---|---|
| 17 - 19 | 18 | M6 / 8 mm | 10 | 6202 017019 | Request a quote |
| 19 - 21 | 18 | M6 / 8 mm | 10 | 6202 019021 | Request a quote |
| 21 - 23 | 18 | M6 / 8 mm | 10 | 6202 021023 | Request a quote |
| 23 - 25 | 18 | M6 / 8 mm | 10 | 6202 023025 | Request a quote |
| 25 - 27 | 18 | M6 / 8 mm | 10 | 6202 025027 | Request a quote |
| 27 - 29 | 18 | M6 / 8 mm | 10 | 6202 027029 | Request a quote |
| 29 - 31 | 20 | M7 / 10 mm | 13 | 6202 029031 | Request a quote |
| 31 - 34 | 20 | M7 / 10 mm | 13 | 6202 031034 | Request a quote |
| 34 - 37 | 20 | M7 / 10 mm | 13 | 6202 034037 | Request a quote |
| 37 - 40 | 20 | M7 / 10 mm | 13 | 6202 037040 | Request a quote |
| 40 - 43 | 20 | M7 / 10 mm | 13 | 6202 040043 | Request a quote |
| 43 - 47 | 20 | M7 / 10 mm | 16 | 6202 043047 | Request a quote |
| 47 - 51 | 20 | M7 / 10 mm | 16 | 6202 047051 | Request a quote |
| 51 - 55 | 20 | M7 / 10 mm | 16 | 6202 051055 | Request a quote |
| 55 - 59 | 20 | M7 / 10 mm | 16 | 6202 055059 | Request a quote |
| 59 - 63 | 20 | M7 / 10 mm | 16 | 6202 059063 | Request a quote |
| 63 - 68 | 20 | M7 / 10 mm | 16 | 6202 063068 | Request a quote |
| 68 - 73 | 20 | M8 / 13 mm | 30 | 6202 068073 | Request a quote |
| 73 - 79 | 25 | M8 / 13 mm | 30 | 6202 073079 | Request a quote |
| 79 - 85 | 25 | M8 / 13 mm | 30 | 6202 079085 | Request a quote |
| 85 - 91 | 25 | M8 / 13 mm | 30 | 6202 085091 | Request a quote |
| 91 -97 | 25 | M8 / 13 mm | 30 | 6202 091097 | Request a quote |
| 97 - 104 | 25 | M8 / 13 mm | 30 | 6202 097104 | Request a quote |
| 104 - 112 | 25 | M8 / 13 mm | 30 | 6202 104112 | Request a quote |
| 112 - 121 | 25 | M8 / 13 mm | 30 | 6202 112121 | Request a quote |
| 121 - 130 | 25 | M8 / 13 mm | 30 | 6202 121130 | Request a quote |
| 130 - 140 | 25 | M10 / 15 mm | 45 | 6202 130140 | Request a quote |
| 140 - 150 | 28 | M10 / 15 mm | 45 | 6202 140150 | Request a quote |
| 150 - 162 | 28 | M10 / 15 mm | 45 | 6202 150162 | Request a quote |
| 162 - 174 | 28 | M10 / 15 mm | 45 | 6202 162174 | Request a quote |
| 174 - 187 | 28 | M10 / 15 mm | 45 | 6202 174187 | Request a quote |
| 187 - 200 | 28 | M10 / 15 mm | 45 | 6202 187200 | Request a quote |
| 200 - 213 | 28 | M10 / 15 mm | 45 | 6202 200213 | Request a quote |
| 213 - 226 | 28 | M10 / 15 mm | 45 | 6202 213226 | Request a quote |
| 226 - 239 | 28 | M10 / 15 mm | 45 | 6202 226239 | Request a quote |
| 239 - 252 | 28 | M10 / 15 mm | 45 | 6202 239252 | Request a quote |
| 252 - 265 | 28 | M10 / 15 mm | 45 | 6202 252265 | Request a quote |
| 265 - 278 | 28 | M10 / 15 mm | 45 | 6202 265278 | Request a quote |
| 278 - 291 | 28 | M10 / 15 mm | 45 | 6202 278291 | Request a quote |
| 291 - 304 | 28 | M10 / 15 mm | 45 | 6202 291304 | Request a quote |
| 304 - 317 | 28 | M10 / 15 mm | 45 | 6202 304317 | Request a quote |
| 317 - 330 | 28 | M10 / 15 mm | 45 | 6202 317330 | Request a quote |
| 330 - 343 | 28 | M10 / 15 mm | 45 | 6202 330343 | Request a quote |
| 343 - 356 | 28 | M10 / 15 mm | 45 | 6202 343356 | Request a quote |
| 356 - 369 | 28 | M10 / 15 mm | 45 | 6202 356369 | Request a quote |
| 369 - 382 | 28 | M10 / 15 mm | 45 | 6202 369382 | Request a quote |
| 382 - 395 | 28 | M10 / 15 mm | 45 | 6202 382395 | Request a quote |
| 395 - 408 | 28 | M10 / 15 mm | 45 | 6202 395408 | Request a quote |
Technical specifications:
Three-positioned: closed/jet/spray
Operating pressure: 3-5 bar
chromes brass nozzle - three positioned nozzle - brass nozzle
Forward to the item's page| Hose diameter mm |
Inch | Article number |
Quote request for the entire size scale |
|---|---|---|---|
| 13 | 1/2 | 5350 013000 | Request a quote |
| 19 | 3/4 | 5350 019000 | Request a quote |
| 25 | 1 | 5350 025000 | Request a quote |
Technical specifications:
With the front part turning the dispersion can be adjusted steplessly also it shuts down the water.
With full opening the water jet is close to straight, with the twist of the head it becomes spray then shuts it down.
brass nozzle - brass nozzle with hose tail
Forward to the item's page| Hose diameter mm |
Article number |
Quote request for the entire size scale |
|---|---|---|
| 13 | 5352 013000 | Request a quote |
| 19 | 5352 019000 | Request a quote |
| 25 | 5352 025000 | Request a quote |
Technical specifications:
It can be ordered with acid resistant design, with drinking water quality!
brass coupling - coupling with claw - coupling with hose tail
Forward to the item's page| Hose ø (mm) |
Claw distance (mm) |
Article number |
Quote request for the entire size scale |
|---|---|---|---|
| 10 | 40 | 5310 010040 | Request a quote |
| 13 | 40 | 5310 013040 | Request a quote |
| 15 | 40 | 5310 016040 | Request a quote |
| 19 | 40 | 5310 019040 | Request a quote |
| 25 | 40 | 5310 025040 | Request a quote |
| 32 | 40 | 5310 032040 | Request a quote |
| 38 | 40 | 5310 038040 | Request a quote |
Technical specifications:
It has a flat sealing surface, swivel female thread and rubber sealing.
The material of it is brass and suitable for light environment.
swivel nut - hose tail - female thread - rubber sealing
Forward to the item's page| Hose ø (mm) |
Female thread |
Article number |
Quote request for the entire size scale |
|---|---|---|---|
| 10 | G 3/8” | 5319 010010 | Request a quote |
| 13 | G 1/2” | 5319 013013 | Request a quote |
| 13 | G 3/4” | 5319 013019 | Request a quote |
| 19 | G 3/4” | 5319 019019 | Request a quote |
| 25 | G 1” | 5319 025025 | Request a quote |
| 32 | G 1.1/4” | 5319 032032 | Request a quote |
| 38 | G 1.1/2” | 5319 038038 | Request a quote |
| 51 | G 2” | 5319 050050 | Request a quote |
| 63 | G 2.1/2” | 5319 063063 | Request a quote |
| 76 | G 32 | 5319 075075 | Request a quote |
Technical specifications:
It has a light design with hexagonal nut and corrugated hose tail.
hexagonal - corrugated hose tail - brass hose tail
Forward to the item's page| Hose ø (mm) |
Male thread |
Article number |
Quote request for the entire size scale |
|---|---|---|---|
| 6 | G 1/4” | 5327 006006 | Request a quote |
| 10 | G 3/8” | 5327 010010 | Request a quote |
| 13 | G 1/2” | 5327 013013 | Request a quote |
| 19 | G 3/4” | 5327 019019 | Request a quote |
| 25 | G 1” | 5327 025025 | Request a quote |
| 32 | G 1.1/4” | 5327 032032 | Request a quote |
| 38 | G 1.1/2” | 5327 038038 | Request a quote |
| 51 | G 2” | 5327 050050 | Request a quote |
| 63 | G 2.1/2” | 5327 063063 | Request a quote |
| 76 | G 3” | 5327 075075 | Request a quote |
| 102 | G 4” | 5327 100100 | Request a quote |
Technical specifications:
Standard: A-A 59326 25.09.98 (earlier MIL-C 27487)
The camlock’s material is aluminium with an NBR (oil and petrol resistant) sealing, which works up to max 100 °C.
The 8" sized camlock has 4 levers.
aluminium camlock - female camlock - camlock with 4 lever - NBR sealing - C type
Forward to the item's page| Hose inside Ø (mm) |
Nominal size |
Operating pressure(bar) |
Article number |
Quote request for the entire size scale |
|---|---|---|---|---|
| 13 | 1/2” | 16 | 5510 013000 | Request a quote |
| 19 | 3/4” | 16 | 5510 019000 | Request a quote |
| 25 | 1” | 16 | 5510 025000 | Request a quote |
| 32 | 1.1/4” | 16 | 5510 032000 | Request a quote |
| 38 | 1.1/2” | 16 | 5510 038000 | Request a quote |
| 51 | 2” | 16 | 5510 050000 | Request a quote |
| 63 | 2.1/2” | 10 | 5510 063000 | Request a quote |
| 76 | 3” | 8 | 5510 075000 | Request a quote |
| 102 | 4” | 7 | 5510 100000 | Request a quote |
| 127 | 5” | 5 | 5510 125000 | Request a quote |
| 152 | 6” | 5 | 5510 150000 | Request a quote |
| 203 | 8” | 3 | 5510 200000 | Request a quote |
Technical specifications:
The galvanized steel hose hanger can be mounted on to the wall.
The data of hose capacity in the chart are valid for 1, 5 high mounted hose reel with deep hanged hose, according to the manufacturer.
Hose capacity:
- 1/2" 60m
- 5/8" 55m
- 3/4" 40m
- 1" 25m
hose hanger - wall mounted hose hanger - galvanized steel hose hanger
Forward to the item's page| Exterior dimension |
Material | Article number |
Quote request for the entire size scale |
|---|---|---|---|
| 210 x 240 x 165 mm | galvanized steel | 350255 | Request a quote |